Install & Run the Simulation

The simulation on NiryoStudio is only available on the version 1.11.0 and higher version

🚨 Before running the Ned2 simulation, please make sure your system meets the following requirements:

⚠️ WSL is required when using Windows!
Please install and enable Windows Subsystem for Linux before following the course setup.
Operating System

Hardware

  • At least 16 GB RAM for smooth 3D simulation.
  • At least 25Go of Storage available.
  • Modern multi-core processor (Intel i5/i7, Apple Silicon M1/M2/M3, or equivalent).
  • A dedicated GPU is recommended for better 3D performance.
  • At least 4 GO disk space available.
  • Disable your system's power-saving mode, as it can negatively impact the execution of the simulation.

Network

  • Port 9090 must be open and available on the host machine for the simulation to communicate with NiryoStudio.
  • Port 40001 must be open and available on the host machine for using the simulation with PyNiryo.
  • Internet connection is only required on the first launch (to download and install simulation packages).
  • After the first setup, the simulation runs fully offline.
 

Browse through our full documentation here to learn more on how to start the simulation on your device.